Canon pg-810 How to refill black ink cartridge

Canon PG-810 black cartridge CH5PG810WN - Instructions for refilling

First Drill to refill ink cartridge:

You must drill a hole in the indicated area. (see the arrow in the picture)

Second preparation:

Now fill the syringe with 15 cc of back ink. Use a needle to collect the ink.

To remove air from the syringe do the following:
Place the syringe upwards
and gently squeeze until the ink comes out
of the needle.

How to recharge ink Canon PG810:

For the drilled hole - as shown in first photo, - put the needle to the bottom
and inject the ink slowly, gradually removing the needle out.
This is to better spread the ink in the sponge interior.


When ink appears at the hole, the cartridge is complete.
Dry and cover the hole with adhesive tape.

Rest:

It is best to rest the cartridge 10 minutes with head down.
Do not rest on an absorbent paper.
This is done in order to distribute the ink evenly over the sponge(Allows ink to flow to the print head).

The cartridge is ready for use.

Ink cartridge yield 220 pages

Canon printer models that use these cartridges Canon PG 810

Pixma iP2770

Pixma iP2772

Pixma MP245

Pixma MP258

Pixma MP268

Pixma MP276

Pixma MP287

Pixma MP486

Pixma MP496

Pixma MP497

Pixma MX328

Pixma MX338

Pixma MX347

Pixma MX357

Pixma MX366

Pixma MX416

Pixma MX426